Court Repair
A surface that plays flat, drains clean, and holds its color through Georgia summers.
What Goes Wrong
The fix that skips surface prep costs more the second time around.
Applying color coat directly over open cracks traps moisture underneath, causing the new coat to bubble and peel within months.
Acrylic-based sealant is worked flush with the surrounding surface before any resurfacer or color coat is applied.
Unleveled low spots collect standing water after Georgia’s heavy summer rain, accelerating surface breakdown and creating slip hazards.
Patch compound brings low areas flush before the resurfacer goes down, so drainage works as designed after the repair.
Spot patching a court with widespread cracking delays the inevitable, the surrounding surface continues to deteriorate around the patch.
A surface inspection maps cracks, low spots, and adhesion before any scope is set, so the fix matches the actual damage level.
Resurfacer applied over dirt, algae, or loose material bonds poorly and lifts at the edges within one season of UV and heat exposure.
Power washing removes contaminants and loose material so every subsequent coat bonds to a clean, stable substrate.
Repair Scope
From a single cracked section to a full resurfacing, the scope is set by what the inspection finds, not a fixed package.
Acrylic sealant worked flush into cracks stops them widening under Atlanta’s UV load and heat cycles.
Patch compound levels bird baths and drainage failures before any resurfacer coat is applied over them.
Multiple coats of acrylic resurfacer restore a flat, consistent playing surface after prep work is complete.
Acrylic-based color coat is applied over the cured resurfacer to restore appearance and protect against UV fading.
Regulation pickleball lines are re-striped to correct dimensions once the color coat has fully cured.
Full damage map before any scope is written.
Removes dirt, algae, and loose material.
Low spots leveled to prevent standing water.
Confirms existing surface will hold new coats.
Why Choose Us
Accountability at every stage, from the first site visit to the final walk-through.
The on-site evaluation maps damage and drainage before scope or price is discussed, so nothing is guessed.
Every repair line, crack fill, resurfacer coats, color coat, striping, is priced separately in the written proposal.
Spot repair and full resurfacing are quoted as distinct options when both are viable, so you choose the right level.
The installer walks the finished court with you and addresses anything that does not meet the agreed scope.
The written proposal and timeline sit with you first, no work is scheduled until you confirm the scope in writing.
The Process
01
Submit your site details and we arrange a free on-site inspection to map cracks, low spots, and surface condition.
02
A written, itemised proposal with repair scope, coat sequence, and a clear timeline is sent before any work is scheduled.
03
The repair is completed to the agreed scope, then the installer walks the court with you before the job is signed off.
Pricing Estimates
| Job | Typical cost |
|---|---|
| Minor court repair | $500-$2,000 |
| Patch and line repair | $1,500-$4,000 |
| More involved court repair | $4,000-$8,000 |
Tell us your site details and we’ll arrange a free on-site evaluation and a written, itemised proposal with no obligation to book.